Iran not to Provide IAEA with Data of Surveillance Cameras

Spokesman of the Atomic Energy Organization of Iran (AEOI) Behrouz Kamalvandi said that his country will not give the International Atomic Energy Agency (IAEA) the data recorded by the surveillance cameras at its nuclear installations before reaching an agreement in Vienna talks.
The IAEA will have no access to data recorded by its surveillance cameras until Iran and the G4+1 group of countries reach an agreement on the revival of the 2015 deal, known as the Joint Comprehensive Plan of Action (JCPOA) and removal of sanctions, Kamalvandi said in an interview with the Arabic-language al-Alam news channel on Saturday.
Elsewhere, he said that Iran has transferred its centrifuge machines to a safe location nearly one year after an act of sabotage at TESA Karaj Complex, a centrifuge component manufacturing workshop near Tehran, damaged cameras at the site.
“Given their high significance, centrifuge machines were moved to a safer location and are now in operation,” Kamalvandi said.
He added that Iran has plans to develop and manufacture centrifuge machines and to boost their security.
“Following the terrorist operation against TESA Karaj Complex, we had to tighten security measures. We moved a significant part of these machines and transferred the rest to Natanz and Isfahan,” Kamalvandi said.
He noted that the International Atomic Energy Agency (IAEA) has presented two reports; one when the machines were being transferred and the other one at the time that the cameras installed at Natanz facility became operational.
Given the ambiguities that have been raised in the reports, Iran explained that all the measures taken have been in line with the agreements reached with the IAEA, the AEOI spokesman noted.
On Thursday, Iran’s acting ambassador to the IAEA Mohammad Reza Qa’ebi said the latest report by the agency confirms that Iran had informed the IAEA on April 4 that all the machines for centrifuge production had been transferred from Karaj to Natanz, letting the inspectors verify, on the same day, that the machines were not operating.
“The Agency will have no access to information recorded on the memory of its cameras and as long as Iran has not returned to full compliance with the JCPOA, that information would not be made available to the Agency and will be stored in Iran,” Qa’ebi added.
In a statement on January 31, the IAEA said Iran has informed the agency that it will move the production of centrifuge rotor tubes and bellows from TESA Karaj Complex to the central city of Isfahan.
The IAEA confirmed that Iran has informed the agency that it can adjust its surveillance and monitoring measures accordingly, noting that the production of centrifuge rotor tubes and bellows at TESA Karaj Complex has been ceased.
The IAEA inspectors had installed surveillance cameras in a new workshop in Isfahan on January 24 to ensure the machines intended for the production of centrifuge rotor tubes and bellows were under monitoring but the production of the parts there had not started then.
Under a law passed by the Iranian Parliament in December 2020, the AEOI was tasked with restricting the IAEA inspections and accelerating the development of the country’s nuclear program beyond the limits set by the 2015 Iran agreement.
The law, dubbed the Strategic Action Plan to Counter Sanctions, halted all inspections of Iran nuclear facilities beyond the Safeguards Agreement, in a move – as the name suggests – to push the US to remove its sanctions.

About Parvin Faghfouri Azar

Check Also

Crude Oil Rebounds from Nine-Month Lows; EU Price Cap in Doubt

Oil prices stabilized Monday, rebounding after earlier falling to the lowest levels in nine months, …

Leave a Reply

Your email address will not be published.